TDS-100H-S1 Ultrasonic Flow Meter Flow Meter Clamp on Sensor (DN15-100mm)

TDS-100H-S1 Transducer Features:

 

1. Better than 1% accuracy.
2. 0.2% of repeatability.
3. Positive/negative/net floe totaliser
4. 4 line LCD display.
5. Operate with clamp-on transducers.
6. RS-232/OCT output
7. Ni-MH Battery life for up to 12 hours continuous operation.

TDS-100H-S1 Transducer Parameter:
 

Parameters	HS	HM	S1	M2	L1	S1H	M1H
Pipe size(mm)	DN15-100	DN50-700	DN15-100	DN50-700	DN300-6000	DN15-100	DN50-700
Pipe size(inch)	1/2"-4"	2"-28"	1/2"-4"	2"-28"	12"-240"	1/2"-4"	2"-28"
Material	Aluminum Alloy		ABS			Special                                                          High-Temperature           Materials
Frequency	1MHZ
Installation Method	V(N、W)	V、Z	V(N、W)	V、Z	Z	V(N、W)	V、Z
Calibration	Calibrate with the main unit
Magnetism	Magnetic				No Magnetic
Temperature	32℉-158℉(0℃-70℃)					32℉-320℉(0℃-160℃)
Protection Class	IP65
Dimension (mm)	200×25×25	280×40 ×40	45×30 ×30	60×45 ×45	80×7 ×55	90×85 ×24	90×82 ×29
Weight(g)	250	1080	75	250	650	94	150
Liquid Types	water,sea water,waste water,chemical liquids,oil,crude oil,alcohol,beer,etc.
Suspention Concentration	≤20000ppm, may contain very small amount of air bubbles.
Pipe Material	All metels, most plastics,fiber glass,etc.
Dedicated Shielded Tranducer Cable	Standard length 5 meter ×2, can be extended to 10 meter ×2 or 15 meter ×2

                                                         
TDS-100H-S1 Transducer Specification:
 

Linearity	0.5%
Repeatability	0.2%
Accuracy	±1% of reading at rates>0.6 ft/s. ±0.5% with on-site calibration
Response Time	0-999 seconds, user-configurable
Velocity	±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional
Pipe Size	(15 ~ 6,000mm)
Rate Units	Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.
Totaliser	7-digit totals for net, positive and negative flow
Liquid Types	Virtually all liquids
Security	Setup lockout. Access code needed for unlocking
Display	4x16 English letters
Communication Interface	RS-232C, baud-rate: from 75 to 115,200 bps. Protocol made by the manufacturer. User protocols can be made on enquiry.
Transducers	Model S1 for standard, other models for optional
Transducer Cable	Standard 2x30’ (10m), optional 2x1,500’ (500m)
Power Supply	3 AAA Ni-H built-in batteries. When fully charged it will last over 10 hours of operation. 90-230VAC for the charger
Data Logger	Built-in data logger can store over 2,000 lines of data
Manual Totalizer	7-digit press-key-to-go totalizer for calibration
Housing Material	ABS. Aluminum alloy protective case
Case Size	3.9"x2.6"x0.8" (100x66x20mm)
Handset Weight	1.2 lbs (514g) with batteries

 
TDS-100H-S1 Transducer Package including:
 
1×TDS-100H main machine                                                                                         
1×S1 sensor (DN15-100mm)                                                  
1×Clamp Fixture                                                                        
1×Tape Ruler                                                                             
2× 5mCable                                                                                      
1×Power Adaptor                                                                       
1×Alunimum Case                                                                      
1× English User Manual
1×Coupling Agent(only one empty bottle)        
                      
Note: Because air shipping is not allowed to ship liquid or something like that, so coupling agent cannot ship to you. You can use silica get or butter to replace.