| Linearity | Better than ±1%. |
| Accuracy | ±1% of reading at rates >0.6 ft/s (0.2m/s). Assume a fully developed flow profile. |
| Repeatability | ±0.2%. |
| Velocity | ±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional |
| Measurement Period | 0.5s |
| Display | LCD with backlight. 2x20 letters. |
| Keypad | 4x4-key membrane keypad with tactile feedback |
| Units | English (U.S.) or metric. |
| Outputs | Analogue output: 4-20mA or 0-20mA current output. Impedance 0~1kW. Accuracy 0.1%. . |
| Isolated OCT output: for frequency output (0~9,999Hz), alarm driver, or totaliser pulse output, ON/OFF control, etc. Relay output 1A@125VAC or 2A@30VDC. For ON/OFF control, alarm driver, totaliser output, etc. |
|
| Internal Alarm (Buzzer): user programmable. External Alarm Driver: alarm signal can be transmitted to Relay or OCT output terminals to drive an external alarm. |
|
| RS-232 serial port. | |
| Input | Five channel 4-20mA current inputs for signals such as temperature, pressure, liquid level, and etc. Accuracy 0.1%. Two of the five input channels are wired to terminal blocks. The remaining three channels are optional. |
| Enclosure | Die-cast aluminum enclosure. |
| Protection Class: IP65 (NEMA 4X). | |
| Size: 9.88x7.56x3.15 (251x192x80mm3) for standard version | |
| Clamp-on | S1-type: for pipe size 1~4 (DN30~DN100mm) |
| M2-type: for pipe size 2~28(DN50~DN700mm) | |
| L1-type: for pipe size 11~240(DN300~DN6,000mm) | |
| Liquid Types | Virtually all commonly used clean liquids. |
| Liquids with small quantity of tiny particles may also be applicable. Particle size should be less than 75um, particle concentration less than 10,000ppm. | |
| Liquids should contain no or very minor air bubbles. | |
| Examples are chilled/hot water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, etc. | |
| Liquid Temp | 32F - 212F (0C - 100C) for clamp-on transducer. Higher temperatures can be accommodated. Consult the manufacturer for assistance. |
| 32F - 302F (0C - 150C) for wetted transducer. | |
| Pipe Size | 1 ~ 240 (DN25mm ~ DN6,000mm). |
| Pipe Material | All metals, most plastics, fiber glass, etc. Allow pipe liner. |
| Cable | Shielded transducer cable. Standard length 15 (5m). Can be extended to 1640 (500m). Contact the manufacturer for longer cable requirement. |
| Power | AC: 240V DC: 8VDC~36VDC |
| Power consumption: < 2W | |
| Weight | Standard main unit: 5kg |
