Product Description
Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is Fluke’s premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power.It expands upon the capabilities of the popular 772 mA Clamp Meter, adding voltage measure and source, scaled mA output, and mA in/out.
Fluke 773 Milliamp Process Clamp Meter
TOP 5 Reasons to get The 773 mA Clamp Meter
1. Automatically change the voltage output for remote testing
2. Automatically change the 4 to 20 mA output for remote testing
3. Enables milliamp signal logging to a separate logging device without breaking the loop
4. Power saving features, auto-off, backlight timeout extend battery life
5. Best in class 0.2 % accuracy
Highlight of Fluke 773：
- Measure 4 to 20 mA signals without ”breaking the loop”
- Source 4 to 20 mA signals for testing control
- Simulate 4 to 20 mA signals for testing control
- Measure 4 to 20 mA signals with in-circuit
- Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
- Source mA output signals in a linear ramp or 25 % step output
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
The 773 mA Clamp Meter features:
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without "breaking the loop”
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Hold function captures and displays changing measurements
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Source 4 to 20 mA signals for testing control system I/O or I/Ps
mA output linear ramp or 25% step output
DC voltage measurement to verify 24V power supplies or voltage I/O signals
Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators
Voltage output linear ramp or 25% step output
Milliamp Process Clamp Meter Specifications:
Intrinsically safe: No
Type: Digital
Data hold: Yes
Special Features: Source and simulate 0 to 24 mA DC, Source 0 to 10 VDC, Non-Contact DC mA
Amps DC: 0 to 99.9 mA
Battery Type: (4)AA Alkaline
Measurement Functions: V, mA
Counts: 2400 or 99.9
Operating Temp: -10 Degrees to 50 Degrees
Mfr Number: FLUKE-773
Item: Process Clamp on Ammeter
Auto Ranging: Yes
Manufactures warranty length: 3 Years Electronics, 1 year for clamp and cable.
Voltage(DC): 0 to 30
Source/Simulate: V, mA
Jaw capacity: 0.177"
Display: LCD
Zoro number: G2671733
Differences among Fluke 77x Models?
| Item |
Fluke 771 |
Fluke 772 |
Fluke 773 |
| |
Non-contact mA loop measurement |
Integrated mA loop troubleshooting |
Advanced process troubleshooting |
| mA measure, jaw |
Yes |
Yes |
Yes |
| mA measure, in circuit |
NO |
Yes |
Yes |
| Loop power |
NO |
Yes |
Yes |
| mA source |
NO |
Yes |
Yes |
| DCV measure |
NO |
NO |
Yes |
| DCV source |
NO |
NO |
Yes |
| mA scaled output |
NO |
NO |
Yes |
| mA in / out |
NO |
NO |
Yes |
The 773 mA Clamp Meter Package Including:
1pc x Fluke 773 Milliamp Process Clamp Meter
1pc x Test leads
1pc x Instructions
1pc x Soft carrying case
If you have any questions, please feel free to contact us by following way:Email: Sales@iDiyTools.com
Whatsapp: 0086-18046220975
Shipment Warm Tips:We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the
screen shot of new shipping address under paypal account to sales@iDiyTool.com or whatsapp:+86 18046220975.
