Product Description
Fluke 771 Milliamp Process Clamp Meter DMM Test AC MA Tester,will save your time by NOT breaking the loop on 4-20 mA signal measurements.
Fluke 771 Milliamp Process Clamp Meter DMM Test AC MA Tester
Milliamp Clamp Advantages:
Saves time and money
Measure mA signals for PLC and control system analog I/O without breaking the loop.
Measures low level dc current
Correlate process indication with real physical value
Measure output signals from transmitters without breaking the loop
Maintain and troubleshoot process and automation equipment without breaking the loop
No disruption to the process
Detachable clamp with extension cable
Measurements in tight locations
Enables measurements in difficult situations
Measurement Spotlight
Illuminates hard to see wires in dark enclosures
Measurement process is easier and quicker
Measure up to 99.9 mA range non-contact
Wide range of measurements
Measures 10 to 50 mA signals in older control systems
Automatic power off
After 15 minutes and 2 minute automatic off for backlight and spotlight
Saves battery life
Will you Need more hours in your day?
Are you spending time:
Taking mA measurements by removing a wire and breaking the loop
Calling the control room to isolate a loop
Testing analog input/output on a console
Troubleshooting devices with mA inputs and outputs
Repairing intermittent or erratic 4-20 mA loops
Going back to the shop to get extra tools
If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save your time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Save time by NOT breaking the loop on 4-20 mA signal measurements.
Milliamp Clamp Feature:
Best in class 0.2 % accuracy
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without ”breaking the loop”
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Milliamp Clamp Specifications
Milliamp Clamp Specifications
|
Diameter of measurable conductor
|
0.177” or 4.5 mm max
|
|
Operating temperature
|
-10 to 50 ºC
|
|
Storage Temperature
|
-25 to 60ºC
|
|
Operating Humidity
|
< 90% @ <30 ºC, < 75% @ 30 to 55ºC
|
|
Operating Altitude
|
0 to 2000 m
|
|
IP Rating
|
IP 40
|
|
Size
|
59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
|
|
Weight
|
260G, (9.1 oz.)
|
|
Vibration
|
Random 2 g, 5 to 500 Hz
|
|
Shock
|
1 meter drop test (except the jaw)
|
|
EMI/RFI
|
Meets EN61326-1
Note: For current measurement w/ JAW,
add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
|
|
Temperature Coefficient
|
0.01% ºC
(<18? or > 28?)
|
|
Power, battery life
|
(2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
|
|
Warranty
|
Three years for electronics
one year for cable and clamp assembly
|
|
mA measurement (Measured by clamp)
|
Resolution and Range: 0 to 20.99 mA
Accuracy: 0.2% +2 counts
Resolution and Range: 21.0 mA to 100.0 mA
Accuracy: 1% + 5 counts
|
Please note:
The standard package doesn't include batteries.Because the international air shipping forbid to ship liquid,powder and batteries,we CAN'T put them in the package box.Hope you can understand,but you can buy them in your local store or supermarket.Thanks for your support!
Milliamp Clamp packing list
1 x Fluke 771 Milliamp Process Clamp Meter DMM Test AC MA Tester
If you have any questions, please feel free to contact us by following way:Email: Sales@iDiyTools.com
Whatsapp: 0086-18046220975
Shipment Warm Tips:We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the
screen shot of new shipping address under paypal account to sales@iDiyTool.com or whatsapp:+86 18046220975.
