CEM DT-156 Paint Coating Thickness Gauge Meter Auto F/NF Probe 1250μm V-groove

CEM DT-156 Paint Coating Thickness Gauge Meter Auto F/NF Probe 1250μm V-groove

Get Coating Thickness Meter (DT-156) for 5 Reasons:

Coating Thickness Meter (DT-156) Description:

1. This professional Coating Thickness Meter (DT-156) is a compact and handy gauge designed for non-destructive, fast and precise coating thickness measurement with measuring range 0 ~ 1250 μm / 0 ~ 50 mil. It works either on the magnetic induction principle or the eddy current principle, depending on the type of sensor probe selected (Fe or No Fe). With the two types of probe equipped, only one gauge is required to measure non-magnetic coatings on a magnetic substrate (ferrous, Fe) or insulating coatings on a non-magnetic conductive substrate (non-ferrous, NFe). The V-groove in the sleeve of the probe facilitates reliable measurements on small cylindrical parts.

 

2. This gauge has two measuring modes, CONTINUE & SINGLE and two working modes, DIRECT & GROUP to meet your various needs. DIRECT mode is recommended for simple, quick and occasional measurement while GROUP mode permits storage of maximum 400 data for statistical analysis. It provides statistic functions including AVG, MAX, MIN, S.DEV. USB cable and software CD are included for connection and work with PC. Other important features are backlight LCD, high/low alarm, auto power off and calibration foils included.

Coating Thickness Meter (DT-156) Specification:

Sensor Probe	F	No Fe
Working Principle	Magnetic induction	Eddy current principle
Measuring Range	0~1250µm 0~49.21mils	0~1250µm 0~49.21mils
Guaranteed Tolerance (of reading)	0~850µm (±3%+1µm) 850µm~1250µm (±5%)	0~850µm (±3%+1.5µm) 850µm~1250µm (±5%)
	0~33.46mils (±3%+0.039mils) 33.46mils~49.21mils (±5%)	0~33.46mils (±3%+0.059mils) 33.46mils~49.21mils (±5%)
Precision	0~50µm(0.1µm) 50µm~850µm(1µm) 850µm~1250µm (0.01mm)	0~50µm(0.1µm) 50µm~850µm(1µm) 850µm~1250µm (0.01mm)
	0~1.968mils (0.001mils) 1.968mils ~33.46mils (0.01mils) 33.46mils ~49.21mils (0.1mils)	0~1.968mils (0.001mils) 1.968mils ~33.46mils (0.01mils) 33.46mils ~49.21mils (0.1mils)
Minimum Curvature Radius	1.5mm	3mm
Diameter of Minimum Area	7mm	5mm
Basic Critical Thickness	0.5mm	0.3mm
Working Temperature	0°C ~40°C (32°F~104°F)
Working Relative Humidity	20%~90%RH
Item Size	110 x 50 x 23mm
Item Weight	100g

Coating Thickness Meter (DT-156) Detailed Pictures:




Coating Thickness Meter (DT-156) Packing Including:

 

1pc  x Coating Thickness Gauge

5pcs  x Calibration Foils

1pc  x Aluminum Substrate

1pc  x Iron Substrate

1pc + x USB Cable

1pc x Software CD

2pcs x 1.5V AAA Battery

1pc  x Instruction Manual

1pc x Small Storage Box