Product Description
ARM ARM9 linux s3c2416 development board with 7” TFT capacitive Screen
ARM ARM9 linux s3c2416 development board with 7” TFT capacitive Screen with WIFI
Hardware Introduction:
Appearance of ICOOL2416 Development Board
Hardware Resources Description of ICOOL2416 Development Board：
CPU Processor
Samsung S3C2416, ARM926, Basic Frequency 400MHz， Highest Frequency 533MHz
DDR RAM Memory
64MByte DDR2 266 RAM
Sound Card
Wolfson technical sound card WM8960
FLASH Memory
256M/512M/1GB/2GB/4GB/ Nand Flash （Standard Configuration is 256M SLC NAND）
LCD Display
1. CPU integrates four-wire resistive touch screen interface, which can link four-wire resistive touch screen straight. You should use I2C or SPI mode if use capacitive touch screen. We have already lead I2C on LCD interface in order to make users more convenient. The equipped 7-inch screen is capacitive 5-dot touch screen.
2. It supports black and white dot matrix, gray dot matrix, CSTN, 64~1600K TFT LCD. Its size is from 2.2 inches to 24 inches. Resolution ratio of TFTLCD screen can reach 1024*768 pixels.
3. Standard configuration is 7-inch LCD whose resolution ratio is 800*480, with capacitive 5-dot touch screen
Standard Interface Source
1. One SPI
2. One 10/100M Ethernet RJ45 Interface
3. Four USB Host 1.1 interfaces
4. One aux USB 2.0 interface
5. Two DB9 RS232 3-wire ports (And four more TTL power level outlets)
6. One TF card connector (Maximum capacity is 32G)
7. One 3.5mm stereo audio output interface
8. One 3.5 mono audio input interface
9. One PWM control buzzer
10. Two 8ohm speaker interfaces (Power is 1W)
11. Six custom keys
12. One ADC test for adjustable resistor
13. One PWM controlling LCD backlight adjuster
14. 5V/2A DC voltage input
15. Onboard backup power for real-time clock
Expansion Interface Source
1. Four ports connectors (two DB9 and four white in-line connectors which the distance between is 2.0mm)
2. One 20pin 2.0mm dual-line connector, IO interface
3. One 20pin 2.0mm dual-line connector GPIO interface
4. Dual LCD interface (50pin 0.5mm LCD interface and 40pin 2.0mm dual-line connector)
PCB Size
1. Size of Basic Board: 180*100(mm)
2. Size of Core Board: 80*55(mm)
Supported Operating System
1. Linux3.0.1 + Qtopia-2.2.0 + QtE-4.7
2. WindowsCE.NET 6.0(R3)
Mechanical Size Drawings：
The positioning holes plots of ICOOL2416(unit is mm)
1. Size of the base board:180*100(mm)
2. Size of the Core Board: 80*55(mm)
Attention: the label is from the Core Board
System Resource Feature of Linux：
Kernel Version
Linux 3.1.0
Boot Loader
U-boot-1.3.4: Provide complete source code, including Nand and SD Start according to the differences of the configuration file.
Supporting File System：
1. UBIFS: File system can be read and written, Recommended using.
2. yaffs2: File system can be read and written, Recommended using.
3. UBIFS: File system developed especially for Flash device, providing volume management function.
4. NFS: Network file system belong to Linux System. It can be conveniently used when you develop a driver.
Device Driver(drivers below are all provided with source code)
1. Four standard serial ports drivers
2. Audio driver(WM8960)
3. Dual web ports driver, WIFI&DM9000 driver
4. USB Keyboard Driver, USB, removable hard disk
5. RTC driver(could saving time when power off)
6. USB Host driver
7. 4.3/7 TFT LCD Driver
8. 4-wire touch screen driver
9. Universal USB camera driver without driving
10. SPI driver
11. SD Card Driver, supporting high-speed SD card
12. I2C-EEPROM
13. LCD Backlight Driver
14. Multimedia driver
15. Usb WIFI driver
16. Watchdog Driver(Watchdog reset is cold reset)
Basic Application and Service Test Procedure
1. busybox1.17(Linux Toolset, including common Linux instruction, etc)
2. madplay(mp3 player based on controller)
3. Telnet, Ftp, inetd(Toolset and service for network remote login)
4. boa(web server)
5. snapshot(fbshot based on controller)
6. ifconfig, ping, route, etc (common web tool instruction)
Graphics System
1. Qtopia-2.2.0 : providing platform source code, Compile Script, Install file
2. Qtopia-2.2.0 : providing platform source code, Compile Script, Install file
Cross-compiler Version
arm-linux-4.3.3 using gnueabi function to accelerate for ARM architecture
WinCE 6.0 System Resource Feature：
Version WinCE Embedded 6.0 R3
BSP Feature：
1. Supporting fast booting
2. Supporting booting progress bar
3. Ports Driver
4. Camera driver
5. 6 key driver
6. DM9000 Network Card Driver
7. 4.3/7 TFT LCD driver
8. RTC driver
9. WIFI Wireless Network Card Driver
10. Large-capacity, high-speed SD Card Driver
11. Touch Screen Driver
12. USB Driver, USB Keyboard Driver, USB Mouse Driver, etc
13. Audio Input and Output Driver: Based on WM8960 Chip
Operating Condition：
Working temperature : 0~70 ℃
working voltage ：3.7~5.5V (typical value :5V)
ADC input :0~3.3V, 1mA
DAC output :0~3.3V, 5mA
VDDRTC input : 1.7V~3.3V (typical value :3V,100uA)
Digital signal output level :0~3.3V , 5mA
Digital signal input level :0~3.3V ,5mA
Package including:
1pc X ICOOL210 mother board
1pc X ICOOL210B core board
1pc 7" LCD with capacitive touch screen
1pc X serial cable
1pc X miniUSB cable
1pc X internet cable
1pc X power (5V/2A)
1pc x CD manual
If you have any questions, please feel free to contact us by following way:Email: Sales@iDiyTools.com
Whatsapp: 0086-18046220975
Shipment Warm Tips:We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the
screen shot of new shipping address under paypal account to sales@iDiyTool.com or whatsapp:+86 18046220975.
