Product Description
3.5" TFT LCD MONITOR CCTV Security Surveillance CAMERA TESTER TEST 12V OUTPUT,Can carry out can see to turn to show that the net line conjunction circumstance and the net lines link the sequence.
3.5" TFT LCD MONITOR CCTV Security Surveillance CAMERA TESTER TEST 12V OUTPUT
CAMERA TESTER Features:
-CCTV installation works best detection system is equipped with built-in lithium battery, video input, audio input, seven kinds of standard color bar output terminal and the DC12V power supply, only palm-sized, easy to carry operations
-Through DC power out enables user to inspect; correct camera or confirm installation. It's convenient for video equipment that helps communication and discussion with clients during installation process.
CAMERA TESTER Application :
Monitor: Camera quality inspecting; image of installation correcting; inspect and repair of monitor system circuit…… etc.
Introduction to function of product:
Portable product
Portable product is able to use in any place and any time. It is easy to hold and do not need complicated equipment that hinders the inspecting and repairing。
Monitor
3.5 ″high image resolution monitor enable to show clear image that fits any place to use.
Long work time
Equips with Lithium battery of high capability. Each 2 hours recharge durables 4.5 ～5 working hours.
Humanized design of appearance
Hand-hold design for professionals. Easy operation without taking off gloves speeds your works. Clasp ring at bottom fits to all chains and use in all environments.
Support DC power for camera
It's convenient for user to check camera condition and correct direction of camera, so to make installation and repairing easier.
The net line test function
Can carry out can see to turn to show that the net line conjunction circumstance and the net lines link the sequence
All Function Introduction:
2. When inserting transformer charging , the indicator( red) is bright, enough power will put out instructions
3. The indicator( green) is bright after the switch start, indicator will put out when switch is close.
4. Press Function menu button to open or close LCD setting menu .
5. After openning the function menu, press to press this key and can enter the net line test function, press 5 or 6 keys to break the test result
6. After openning the function menu, press this botton adjust brightness ,Contrast degree,Colorful saturation degree and Volume
7. 5V power input AC/DC transformer DC5V 1.0A
8. Power switch.
9. Hight brightness LED lighting lamp.
10. The camera power output and video,audio,and signal through this block input ,Lens power through this block output so that picture will show on the host screen .
11. Built-in loudspeaker.
CAMERA TESTER Specification:
| Display |
3.5"TFT Color LCD |
| Image Resolution |
320X240 |
| Video In |
Video In × 1 (BNC connector) |
| Power out |
DC power out × 1
(Support CCD camera of power source/
Max electric currency 500mA) |
| System Format |
NTSC / PAL |
| Light instruction |
2 LED
(Power IND = Green / Charging IND =Red) |
| Battery Specification |
Built-in rechargeable Lithium battery : 3.7V 2000mA/h |
| Power Specification |
External power :DC 5V 1.0A Adapter |
| Dimension/ Weight |
180mm (L) x 98mm (W) x 30mm(H) / 250g |
CAMERA TESTER Package Include:
1* Camera tester
1* Charger
1* CCD power cord DC12V OUTPUT & AV cable
1* RJ45 adaptor
1* User manual
1* Carrying Box
Customers' FAQ
Question: Why can’t turn on the device:
1.Check battery power capability.
2.Check if correctly using the original manufactured re-charger.
3.Check if the re-charger is normal working.
Question: Why can't the image function normally?
1.Check if the camera connects correctly with the terminal of the mainframe.
2.Check if the power is on or off.
3.Check power volume. Please recharge if the power runs out.
Warning:
☆ Please avoid product exposing rain drenching and moisture that would cause malfunction of product.
☆ Any operating or modification not in accordance with this manual might cause product unable to use of permanent damage.
If you have any questions, please feel free to contact us by following way:Email: Sales@iDiyTools.com
Whatsapp: 0086-18046220975
Shipment Warm Tips:We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the
screen shot of new shipping address under paypal account to sales@iDiyTool.com or whatsapp:+86 18046220975.
